Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Audi A4 B8 version

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

In this video we can see how to remove the front bumper from the Audi A4 B8 version: we will start by removing the screws in the front wheel arches, then we will move on to those that hold the protection fixed in the upper part of the bumper. Under this there are two side screws that we remove, then we go under the car and remove the screws in the lower part of the bumper.

We go back to the wheel arches where there are other screws to remove, under the fender protection. Once these screws are removed from both sides, the bumper is free: we remove the electrical connectors and remove it.


Posted on 25 December 2024 by ScegliAuto


Related tutorials

How to remove the front bumper of the Audi A4
How to remove the front bumper of the Audi A4
Audi A4 (2007-2016 / B8) Below are the instructions that will allow you to remove and replace the front bumper of the Audi A4 by following these simple steps. First, open the…
How to Replace the Timing Belt on Audi A4 B6 TDI
Audi A4 (2000-2004 / B6) In this video tutorial, you will find instructions to remove and replace the timing belt on an Audi A4 B6 TDI. First, lift the vehicle and remove the…
How to mount the front bumper with honeycomb grille on the Audi A4 B9
How to mount the front bumper with honeycomb grille on the Audi A4 B9
Audi A4 (2014-2024 / B9) In this video we can see how to disassemble the front bumper of the Audi A4 and replace it with the RS honeycomb one. We remove the clip in the cente…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos