Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulb on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlight bulb on an Audi A4, start by removing the air filter to easily access the headlight assembly. Open the hood and locate the air filter box, unclip the fasteners, and remove the cover, then take out the filter itself.

Once the space is clear, locate the back of the headlight and unscrew the protective cap to access the bulb. Carefully disconnect the electrical connector and unclip the safety latch holding the bulb in place.

Remove the burnt bulb, taking care not to damage surrounding components, and insert the new one, avoiding touching the glass with your fingers. Reverse the procedure to secure everything in place, ensuring the latch and connector are tight.

Finally, reposition the air filter, close the cover, and make sure all clips are properly locked.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

Audi A4 (2014-2024 / B9) To replace the headlight bulb on an Audi A4, loosen the screws securing the front wheel well of the wheel corresponding to the affected headlight. On…
Audi A4 (2007-2016 / B8) Follow the steps to remove and replace the front headlight bulb, whether halogen or xenon, on your Audi A4. First, open the hood of the vehicle and r…
Audi A4 (2007-2016 / B8) To replace the headlight bulb on an Audi A4, open the hood and loosen the screws that secure the grille at the front of the engine compartment. This …

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos