Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight bulb

Let's discover the process and instructions that will allow us to disassemble and replace the headlight bulb, whether it is halogen or xenon, of the Audi A4, in simple steps. First, we open the hood of the car and start removing the plastic bulb cover; then we disconnect the electrical connector and also remove the bulb, as shown in the video. At this point, we install the new bulb, with the same attachment; we insert it into the headlight assembly and reassemble everything, following the video tutorial until the end!

Posted on 20 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on an Audi A4
How to Replace the Headlight Bulb on an Audi A4
Audi A4 (2000-2004 / B6) In a few simple steps, discover how to replace the low beam headlight bulb on an Audi A4. First, open the hood of the vehicle and disconnect the elec…
Replacing the Headlight Bulb in the Audi A4
Replacing the Headlight Bulb in the Audi A4
Audi A4 (2004-2008 / B7) This guide provides the main instructions to remove and replace the headlight bulb in the Audi A4. First, open the hood of your car and start unscrew…
How to Replace the Headlight Bulb on an Audi A4
How to Replace the Headlight Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Replacing the left headlight bulb on an Audi A4 is a very simple task that you can do yourself with the help of our video tutorial. The first step is…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos