Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tire pressure control reset on an Audi A8

Model: Audi A8 4H, MK 3, D4 - Years 2009-2017
Part: Checks and maintenance

Through this very short video guide, we can see how to reset the tire pressure on an Audi A8 (2009-2017). Let's start by turning on the car's dashboard and then pressing the "CAR" button located on the central tunnel panel, then press the button at the bottom left of the knob to select the "vehicle systems" option on the central display. Once done, using the selection knob, select the "services and controls" option and then the "tire pressure monitor" option, finally click on "set tire pressure" and confirm the operation to complete the task.

Posted on 26 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Tire pressure reset on an Audi A8
Tire pressure reset on an Audi A8
Audi A8 (2019-2026 / Typ4n, MK 4) In today's video, we can see how to reset the tire pressure warning light on an Audi A8, the latest generation model produced from 2019 onwards. Let'…
Resetting Tire Pressure on an Audi A8
Resetting Tire Pressure on an Audi A8
Audi A8 (2009-2017 / 4H, MK 3, D4) This guide shows how to reset the tire pressure on an Audi A8, model D4. Before performing this procedure, it is important to check the correct press…
How to Reset the Tire Pressure Sensor on Audi A8
How to Reset the Tire Pressure Sensor on Audi A8
Audi A8 (2019-2026 / Typ4n, MK 4) To reset the tire pressure sensor on a new generation Audi A8, produced from 2019 onwards, first verify the correct pressure of each tire as indicate…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos