Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Glove Compartment of the Audi A4 B8 and Repairing the Lock

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see how to remove the glove compartment of the Audi A4 B8: start by prying on the outer side of the dashboard and removing the cover panel. Next, remove the three mounting bolts, one located inside at the top and two at the bottom on the outer side.

When you open the door, you will find three more at the top and then inside; after removing the compartment, check the lock for repairs. By removing the clips, you will see that a piece is broken.

You can fix this by gluing the piece with two-part plastic adhesive, and once it is fully dry, secure it with a metal bracket screwed into the plastic. Apply more of the same adhesive on and around the bracket, then sand down any excess glue.

Check the functionality of the moving parts by lubricating everything with WD-40, and then reinstall the compartment by following the reverse procedure.


Updated on 15 November 2026 by ScegliAuto


Related tutorials

Audi A4 (2000-2004 / B6) The instructions in this guide will show us how to disassemble and repair the glove compartment of the Audi A4. First, we open the front door on the …
Audi A4 (2000-2004 / B6) In this guide, follow the steps to remove and replace the glove compartment handle on the Audi A4. First, get in the vehicle and open the glove compa…
Audi A4 (2007-2016 / B8) In this video, you can see how to repair the glove compartment of an Audi A4. If you have noticed that the glove compartment is broken in your vehicl…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos