Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glove Compartment Handle on the Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Glove compartment

In this guide, follow the steps to remove and replace the glove compartment handle on the Audi A4. First, get in the vehicle and open the glove compartment. Then, unscrew the fastening screw of the handle lock and remove it along with the lock cylinder using a Torx screwdriver. At this point, replace the handle with the new one, transferring the old lock cylinder as shown in the video; then reassemble everything!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in an Audi A4?
How to Replace the Key Fob Battery in an Audi A4?
Audi A4 (2004-2008 / B7) To replace the key fob battery in an Audi A4, use a tool to pry open the back cover of the device. Underneath, you will find the battery, which can b…
How to Replace the Door Lock on an Audi A4?
How to Replace the Door Lock on an Audi A4?
Audi A4 (2000-2004 / B6) To replace the door lock on an Audi A4, completely remove the door panel after unscrewing the mounting screws. Once these are removed, you can access…
Replacing the Left Front Turn Signal Bulb on an Audi A4
Replacing the Left Front Turn Signal Bulb on an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to replace the left front turn signal bulb on an Audi A4. Open the hood and secure it; remove the plastic cover above the grille. Disas…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos