Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Original Audi A6 Onboard Computer

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Checks and maintenance

In this video, see how to use the original Audi A6 onboard computer. This operation is very simple. Enter the vehicle, turn on the instrument cluster with the remote key, press the knob near the gear shift, and find the menu with the update or functions to perform. Use the buttons located on the left side of the tunnel as shown in the video (enter setup, etc.). Finally, the onboard computer will display various menus with different settings. Double-check everything and turn off the instrument cluster with the appropriate key.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to restore factory settings on the onboard computer of the Audi A6
How to restore factory settings on the onboard computer of the Audi A6
Audi A6 (2018-2026 / MK 5, C8) Today we will explain how to restore the factory settings of the onboard computer of the Audi A6 model C8, produced from 2018 to today. Turn on the o…
How to reset the service on an Audi A6 C6
How to reset the service on an Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In this video, we see how to reset the service of the 2005 Audi A6, specifically the C6 version. On this version, it is not possible to perform a man…
How to Install the Windshield Wiper
Audi A6 (2004-2012 / MK 3, C6) First, position the old wiper in a suitable position for replacement. To do this, use the onboard computer. From the home screen, select "Systems". T…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos