Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on an Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Headlight

In this video, let's see how to remove the third brake light on an Audi A6. We will also see how to remove the right rear light. Remove the plastic cap with a screwdriver and unscrew the screws inside. Once the light is free from any constraints, disconnect it from the spoiler (unplug the corresponding power connectors). Finally, let's install the new light: connect the power connector, insert the light into the hatch (after installing the bulbs), and screw in the retaining pins. Finally, test the proper functioning of the lights.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Third Brake Light of an Audi A6
Removing and Replacing the Third Brake Light of an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Let’s briefly go over the instructions that will allow you to remove and replace the third brake light and its bulbs on an Audi A6. First, open the r…
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) These simple steps will allow you to remove the third brake light assembly and replace its bulbs on an Audi A6. First, open the trunk of the vehicle …
How to replace the third brake light bulb of the Audi A6
How to replace the third brake light bulb of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) Today we will see the instructions that will allow us to disassemble and replace the third brake light bulbs of the Audi A6. First, we open the rear …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos