Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue refill warning on the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: AdBlue warning light

Today in this guide we will discover the instructions that will allow us to carry out the AdBlue liquid top-up warning of the Audi A3, in simple steps. First, we get on board the vehicle and start the instrument panel; we will see the top-up warning and the amount of AdBlue to be poured. Then we open the fuel door and unscrew the AdBlue tank cap, carrying out the top-up with the fluid through the canister or directly at the dispenser; then we start the instrument panel and wait for the control unit to detect the new level of AdBlue (proceed with a diagnostic tool if the warning light does not reset).

Posted on 4 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Audi A3?
How do you reset the AdBlue warning light on the Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) It will be possible to completely make the AdBlue light of the Audi A3 disappear by refilling with the necessary amount of additional fluid: to refil…
How to reset the tire pressure warning on the Audi A3
How to reset the tire pressure warning on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this guide we will see the steps that will allow us to reset the tire pressure warning light on the Audi A3; before performing the TPMS sensor res…
How to reset the MMI system in the Audi A3?
How to reset the MMI system in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3, it may happen that the MMI system shows signs of malfunctioning such as continuous blocks. In these cases, we can try to solve the pr…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos