Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Audi A3?

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: AdBlue warning light

It will be possible to completely make the AdBlue light of the Audi A3 disappear by refilling with the necessary amount of additional fluid: to refill, you will need to open the fuel door and unscrew the blue cap next to the fuel cap. Once this cap has been removed, you can insert the necessary amount of fluid into the tank: this way you can finish the procedure by inserting the cap and closing the fuel door, noting that the light will have disappeared.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue refill warning on the Audi A3
How to reset the AdBlue refill warning on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today in this guide we will discover the instructions that will allow us to carry out the AdBlue liquid top-up warning of the Audi A3, in simple step…
How to Reset the Service Light on an Audi A3
How to Reset the Service Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) After replacing the engine oil and filter on this vehicle as per the user manual, you need to update and reset the service light on the instrument pa…
How to reset the service indicator light on the 2022 Audi A3
How to reset the service indicator light on the 2022 Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) In the following article, we will see how to reset the maintenance service light of the 2022 Audi A3. To reset this light, first start the instrument…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos