Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket Car Radio

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
This video is currently unavailable

The first step is to attach the anchoring tabs to the new car radio using the appropriate pre-drilled bracket. Then, slide the car radio into the bracket to verify that it attaches correctly and subsequently detach it using the provided release keys.

Also, check the compatibility of the adapter wiring for connecting to the original system, making the necessary connections. At this point, proceed to remove the original car radio from the vehicle: insert the release keys into the 4 slots located at the corners of the car radio and extract it by disconnecting the connectors attached to it and connecting them to the adapter wiring for the new car radio.

Remove the 2 screws securing the original car radio bracket, insert the adapter frame for the new car radio, and reapply the securing screws. Insert the support frame and secure it by bending some tabs; connect the adapter wiring connectors to the new car radio and insert it into its bracket until it fully engages; finally, apply the outer frame and perform a functionality check.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Audi A4 (2004-2008 / B7) To remove the original car radio, you need the specific extraction keys, which should be inserted into the slots located at the four corners, with th…
Replacing Original Radio with Aftermarket Model
Replacing Original Radio with Aftermarket Model
Audi A4 (1994-2000 / B5) To remove the original radio, you need the appropriate extraction keys. First, remove the trim around the center console, insert the keys into the sl…
Guide to Installing Xenon Headlights
Guide to Installing Xenon Headlights
Audi A4 (2000-2004 / B6) This guide shows how to install an aftermarket xenon headlight kit. Provided that the installation complies with legal requirements set by traffic re…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos