Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Audi A4 located?

Model: Audi A4 B9 - Years 2014-2024
Part: Fuse box

The Audi A4 model b9 has three fuse boxes inside. The first fuse box is located in the trunk, behind the side panel. To access the box, we must open the trunk and remove the cover of the box. The second and third fuse boxes are located inside the cabin, the second behind the left dashboard side panel and the third behind the footrest next to the pedals. To view the inside of both boxes, we must get on board the vehicle and remove the cover. The contents of the three boxes are shown on the covers.

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Audi A4?
Where is the fuse box located in the Audi A4?
Audi A4 (2014-2024 / B9) The Audi A4 vehicles produced from 2015 to 2019 have three fuse boxes. The first fuse box is installed in the trunk, specifically behind the left das…
Where is the fuse box of the Audi A4 located?
Where is the fuse box of the Audi A4 located?
Audi A4 (2007-2016 / B8) Knowing the exact location of the fuse box of the Audi A4 is a very important operation, as it will allow you to replace one of the fuses contained i…
Where is the fuse box located in the 2018 Audi A4?
Where is the fuse box located in the 2018 Audi A4?
Audi A4 (2014-2024 / B9) The 2018 Audi A4 has three fuse boxes installed inside. The first fuse box is located inside the cabin, specifically behind the left dashboard cover.…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos