Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the Audi A3 8P

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Windshield wipers

In this video we can see how to replace the rear windshield wiper of the Audi A3 8P: replacing the rear windshield wiper is much simpler compared to the front one, even just because of the different curvature of the glass. So let's lift the brush and with both hands, let's remove it by pushing towards us, sliding it upwards. For reassembly, we will have to follow the reverse procedure, squeezing the two small clips on the sides, and locking them by pushing them inwards. Place the blade on the glass, and when working on the new blade, be careful not to move it to the right or left: place it carefully on the glass as straight as possible.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield wipers of the Audi A3
How to replace the windshield wipers of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the…
How do you replace the rear wiper of the Audi A3?
How do you replace the rear wiper of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to replace the rear wiper of the Audi A3, you need to pry to completely disconnect the fastening clips that lock the wiper blade to its arm:…
How to replace the rear wiper on the Audi A3?
How to replace the rear wiper on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) Replacing the rear wiper blade in the Audi A3 is extremely quick and easy, we don't need any tools. After obtaining the appropriate blade for the siz…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos