Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear wiper of the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Windshield wipers

In order to replace the rear wiper of the Audi A3, you need to pry to completely disconnect the fastening clips that lock the wiper blade to its arm: once these clips are removed, you can properly position the new wiper blade. This must now be connected to the arm with the appropriate clips and then positioned on the rear window: once the installation is complete, you should try to operate the rear window to ensure that it is functioning, making sure it can move freely.

Posted on 2 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper motor of the Audi A3
Replacement of the rear windshield wiper motor of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will see step by step instructions on how to disassemble and replace the rear windshield wiper motor of the Audi A3. First, open the rear ha…
How to replace the rear windshield wiper of the Audi A3 8P
How to replace the rear windshield wiper of the Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this video we can see how to replace the rear windshield wiper of the Audi A3 8P: replacing the rear windshield wiper is much simpler compared to …
How to Replace the Rear Wiper Motor on an Audi A3
How to Replace the Rear Wiper Motor on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) If the rear wiper blade does not activate, the drive motor may be damaged. Since the device also integrates the washer, water may have infiltrated. T…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos