Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on Audi A3

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Windshield wipers

In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to detach it, simply bend it downwards and then pull it out from the U-shaped part. Then, fit the new wiper blade into position and secure it with the lever. There are various types of wiper blades, and each requires a different fitting method. Check that the wiper blade is the correct one and then fit it: this procedure also applies to the other wiper blades on the car!

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wiper Blades on the Audi A3
Replacing the Wiper Blades on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) When the wiper blades leave areas of the windscreen unclean, it is time to replace them to ensure good visibility in the rain. Sit in the driver's se…
Replacement of the rear windshield wiper motor of the Audi A3
Replacement of the rear windshield wiper motor of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will see step by step instructions on how to disassemble and replace the rear windshield wiper motor of the Audi A3. First, open the rear ha…
Removing the Rear Wiper Motor on the Audi A3 8P
Removing the Rear Wiper Motor on the Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this short video, see how to remove and replace the rear wiper motor on the Audi A3 8P by following these simple steps. Start by opening the rear …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos