Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Deactivate Wipers on Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Checks and maintenance

This video shows how to activate and deactivate the wiper blades in case of rain on a third-generation Audi A3, following these simple steps. Get in the car and start the engine; to activate the wipers, press down once to perform a manual lift (just once). To activate the automatic wipers, pull the lever upwards with a click for low intensity and with two clicks for high intensity. Pull the lever back to activate the rear wiper.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield wipers of the Audi A3
How to replace the windshield wipers of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the…
How to replace the wipers on the Audi A3?
How to replace the wipers on the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial we can see how to replace the wiper blades on the Audi A3, an extremely simple and quick operation. First of all, let's go inside th…
Replacing Wiper Blades on Audi A3
Replacing Wiper Blades on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to…

    Frequently Asked Questions

    • A3 2012-2019 - How to remove the armrest of an Audi A3? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos