Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Blades on the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

When the wiper blades leave areas of the windscreen unclean, it is time to replace them to ensure good visibility in the rain. Sit in the driver's seat, turn on the instrument panel, then turn it off and push down the lever to the right of the steering wheel that controls the wipers: the blades will move to the top position for easier replacement.

Lift the arm, press the lever on the joint of the blade, and push forward to remove it. After checking compatibility, insert the new blade. Repeat the same process for the other wiper.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to replace the windshield wipers of the Audi A3
How to replace the windshield wipers of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the…
How to replace the wipers on the Audi A3?
How to replace the wipers on the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial we can see how to replace the wiper blades on the Audi A3, an extremely simple and quick operation. First of all, let's go inside th…
How to replace the rear windshield wiper of the Audi A3 8P
How to replace the rear windshield wiper of the Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) In this video we can see how to replace the rear windshield wiper of the Audi A3 8P: replacing the rear windshield wiper is much simpler compared to …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos