Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wipers of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Windshield wipers

In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the windshield wipers and bring them to the middle of the windshield. Once in the middle, turn off the windshield wipers and turn off the instrument panel. At this point, you need to lift the windshield wipers and then press on the appropriate clip to lift the wipers in order to remove them. Once the old windshield wipers are removed, insert the new windshield wipers, then press the clip to lock it, and bring the wipers back into position. Now, replace the second windshield wiper with the same procedure as the first one and the procedure will be complete.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wiper Arm and Motor from an Audi A3 8P
How to Remove the Rear Wiper Arm and Motor from an Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) This guide shows how to remove the arm and motor of the rear wiper from an Audi A3 8P. The first step is to detach the plastic plug at the base of th…
Replacing Wiper Blades on Audi A3
Replacing Wiper Blades on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to…
How to Replace the Rear Wiper Blade on an Audi A3?
How to Replace the Rear Wiper Blade on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) Replacing the rear wiper blade on an Audi A3 is an extremely simple and quick task that requires no tools. After obtaining a blade suitable for the s…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos