Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wipers on the Audi A3?

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

In this tutorial we can see how to replace the wiper blades on the Audi A3, an extremely simple and quick operation. First of all, let's go inside the car, then insert the key, turn on the dashboard and bring the wipers into service position by pressing down the lever.

Next, move outside the vehicle, lift the first wiper blade and, while holding down the indicated button, separate the blade from the arm. At this point, all that's left to do is to position the replacement, tighten it firmly and repeat the operation on the opposite side.


Posted on 22 July 2025 by ScegliAuto


Related tutorials

How to replace the windshield wipers of the Audi A3
How to replace the windshield wipers of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this article, we will see how to replace the windshield wipers of the Audi A3 8P. First, you need to start the instrument panel, then activate the…
Replacing Wiper Blades on Audi A3
Replacing Wiper Blades on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to…
Where is the Windscreen Wiper Fuse in the Audi A3?
Where is the Windscreen Wiper Fuse in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3 8V, the fuse for the windscreen wipers is located in the fuse box in the engine compartment, situated on the right near the battery an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos