Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Windscreen Wiper Fuse in the Audi A3?

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In the Audi A3 8V, the fuse for the windscreen wipers is located in the fuse box in the engine compartment, situated on the right near the battery and protected by a black plastic cover. In this video, you can clearly see the position and diagram of both fuse boxes.

As shown, the fuse in question, rated at 30A, is labelled F19 and is the fifth in the left column. Always remember to replace fuses with equivalent amperage replacements to avoid damaging the systems that use them, and use the supplied pliers.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing Wiper Blades on Audi A3
Replacing Wiper Blades on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this very simple video tutorial, you will learn how to replace the worn wiper blades on the Audi A3. First, lift the wiper blade off the glass: to…
Deactivate Wipers on Audi A3
Deactivate Wipers on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) This video shows how to activate and deactivate the wiper blades in case of rain on a third-generation Audi A3, following these simple steps. Get in …
Where Are the Fuses Located in an Audi A3?
Where Are the Fuses Located in an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In the Audi A3, each fuse is located inside one of the two fuse boxes installed in the vehicle: the first box is found on the left side of the dashbo…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2003-2013 - Where is the license plate light fuse on Audi A3 located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos