Do it yourself
Frequently asked questions about cars and motorcycles

How do you program the key of the Audi A6?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Key

To program the key of the Audi A6, you need to insert the blank key into the corresponding ignition block: once the insertion is done, you can also connect a diagnostic tool to the OBD port of the vehicle located under the steering column. After the connection is made, you can select the model of the car in question and follow the programming procedure; once the operation is completed, you can disconnect the scanner and verify that the new key has been programmed correctly.

Posted on 3 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (1997-2004 / MK 2, C5) Through these short and simple steps, we will see how to program the key remote of the Audi A6. First of all, it is necessary to have both keys at ha…
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will learn how to program the remote for unlocking and locking the doors on the Audi A6 C5, as well as the Audi A4 B6. Fi…
Audi A6 (2011-2018 / C7, MK 4) In this video we can see how to correct the AdBlue error on an Audi A6 (but also A7 and A8): we will also need a laptop with the classic VAG VCDS pro…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos