Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the external rearview mirror of the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Side mirror

Below we will discover the steps on how to disassemble and replace the external rearview mirror of the Audi A4. First, we open the front door of the car and start unscrewing the fixing screws of the door panel, until we detach and remove it (also disconnecting the electrical connector of the window switch); then we unscrew the fixing screws of the rearview mirror, disconnecting the electrical connector to remove it from the outside, as shown in the video. At this point, we replace the mirror with the new one, adjusting its angle!

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the exterior mirror of the Audi A4 B7
Replacement of the exterior mirror of the Audi A4 B7
Audi A4 (2004-2008 / B7) In this video we will see the procedure necessary for the disassembly and replacement of the exterior rear-view mirror of the Audi A4 B7. First we op…
How to disassemble the external rearview mirror of the Audi A4 B8
How to disassemble the external rearview mirror of the Audi A4 B8
Audi A4 (2007-2016 / B8) Disassembling the external rearview mirror of your Audi A4 B8 is really very simple, and by following the steps described below, you can complete the…
How to replace the wing mirror on the Audi A4
How to replace the wing mirror on the Audi A4
Audi A4 (2004-2008 / B7) In today's video tutorial we will see the main instructions on how to disassemble and replace the exterior rear view mirror of the Audi A4. First we …

Other guides you may be interested in

How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf

Let’s see how to remove the armrest on the centre tunnel of a Volkswagen Golf. Unscrew the securing screws (located inside the cup holder) with a screwdriver; use a plastic lever to pry off the cover at the rear of the centre tunnel (air vents). After removing the plastic cover, unscrew the securing bolts in the centre armrest using a socket wrench. Once this is done, pull off the tunnel and disconnect any power cables. Finally, insert the new part into the centre tunnel, and reassemble all components of the glove compartment as previously disassembled.

Watch the video!


by ScegliAuto

More videos