Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Handle of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine

See other generations:
Video tutorial

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover).

Remove the remaining screws on the door panel and detach the retaining clips.

Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…
Replacing the Interior Door Handle on a BMW 3 Series
Replacing the Interior Door Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's steps will show you how to remove and replace the interior door handle on the front door of a BMW 3 Series. First, open the front or rear doo…
How to Remove the Inner Door Handle on a BMW 3 Series
How to Remove the Inner Door Handle on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos