Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the third headlight on Audi A3

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Tail light

Let's see in this video how to remove the third (central) rear light on an Audi A3. We remove the plastic lining with a screwdriver, unscrew the screws placed inside it (if any). As soon as the spotlight is free from any constraint, we can detach it from the spoiler (disconnect the relative power supply terminals). Finally we are going to reassemble the new spotlight: connect the power supply terminal, insert the spotlight in the tailgate (after having mounted the bulbs) and screw the tightening pins of the same. We test the correct functioning of the lights and the mounted headlight.

Posted on 15 September 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light bulb on the Audi A3
How to replace the third brake light bulb on the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Today with the help of this video tutorial we will explain how to replace the third brake light bulb of the Audi A3 model 8v. We begin the replacemen…
Replacement of the third brake light bulbs of the Audi A3.
Replacement of the third brake light bulbs of the Audi A3.
Audi A3 (2003-2013 / 8P, MK 2) This short and simple guide will show us the main instructions on how to disassemble and replace the third brake light bulbs of the Audi A3. First, w…
How to remove the third stop of the Audi A3?
How to remove the third stop of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In this tutorial we can see how to remove the third stop in the Audi A3, useful in case we need to replace a faulty bulb. This is a very simple opera…

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos