Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on the Audi A3?

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part:

See other generations:
Video tutorial

In this tutorial, we will see how to remove the third brake light on the Audi A3, useful if you need to replace a faulty bulb. This is a very simple operation that requires no tools.

Go to the back of the car and grasp the third brake light from both sides, pushing it outward while applying equal force with both hands, as the internal clips are quite fragile. Once the light is free, disconnect the connector and proceed with the operation you want to perform, whether it's replacing a bulb or the light itself.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Remove the Brake Light Switch on an Audi A3
How to Remove the Brake Light Switch on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the brake light switch located under the dashboard cover (left side) of an Audi A3. Unscrew the securing screws of the plastic pa…
How to Replace the Third Brake Light Bulb on the Audi A3?
How to Replace the Third Brake Light Bulb on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To replace the third brake light bulb on the Audi A3, open the boot to access the inside of the rear hatch. Here, you will need to unscrew the two sc…
Replacing the Third Brake Light Bulbs on the Audi A3
Replacing the Third Brake Light Bulbs on the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) This short and simple guide will show you the main instructions on how to remove and replace the bulbs of the third brake light on the Audi A3. First…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos