Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Brake Light Switch on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Push button

See other generations:
Video tutorial

Learn how to remove the brake light switch located under the dashboard cover (left side) of an Audi A3. Unscrew the securing screws of the plastic panel with the appropriate screwdriver, then use a lever to remove the cover. Once located, disconnect the power connector from the brake light switch and extract the switch (as shown in the video).

Finally, install the new brake light switch in its housing as previously removed. Test the switch's correct operation (press the brake pedal with your foot).


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Light Bulb on an Audi A3
How to Replace the Rear Brake Light Bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To replace the brake light bulb of the rear lamp, you must first remove the lamp: once the rear bonnet is opened, locate the caps on the inner lining…
How to Replace the Front Brake Pads on an Audi A3
How to Replace the Front Brake Pads on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this video tutorial, see how to replace the front brake pads on an Audi A3. The first thing you need to do is purchase new brake pads; the next st…
How to activate and deactivate the position lights of the Audi A3 8P
How to activate and deactivate the position lights of the Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) If you don't know how to correctly activate and deactivate the position lights of your Audi A3 8p, don't worry because in the following guide you wil…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos