Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Audi A6

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Tail light bulb

Today we will see the instructions that will allow us to disassemble and replace the rear taillight and its bulbs of the Audi A6. First, we open the rear hatch of the trunk and start unscrewing the internal screw of the taillight, disconnecting the electrical connector of the lights to remove it from the outside; then we separate the bulb holder from the light fixture, thus accessing the stop lights, as shown in the video. At this point, we replace any faulty bulbs with new ones, or the entire rear light; we fix it properly and check the operation of the stop lights.

Posted on 16 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Headlight Bulbs on Audi A6
Removing Headlight Bulbs on Audi A6
Audi A6 (2004-2012 / MK 3, C6) Are the front headlight bulbs blown? Let's see how to remove them on the Audi A6. Open the hood by pulling the lever located at the bottom right of t…
Replacing the Headlight Bulbs on Audi A6
Replacing the Headlight Bulbs on Audi A6
Audi A6 (1997-2004 / MK 2, C5) The headlight bulbs on the Audi A6 are damaged and need to be replaced. Here’s how to change them. Lift the hood by pulling the lever located at the …
How to Remove a Rear Headlight on an Audi A6
Audi A6 (2004-2012 / MK 3, C6) Want to remove the rear headlight of an Audi A6? It's a very simple task. First, open the trunk lid. Then, remove the cover located on the side trim …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos