Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Rear light bulb

Audi A6 - Rear light bulb

Audi A6 (2004-2012 / C6, MK 3)
How to replace the rear light bulb on an Audi A6

Before starting, we will have to open the tailgate of the luggage compartment of our Audi A6. So let's start by disengaging and removing the internal cover on …read all…
Posted on 24 January 2024 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
How to replace the rear light bulb on an Audi A6

Before we can start, we will have to go to open the tailgate of the trunk of our Audi A6. So let's start by disengaging and removing the internal door located …read all…
Posted on 24 January 2024 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
How to replace the rear light bulb on an Audi A6?

Let's start by opening the tailgate of the luggage compartment of our Audi A6. After that, we will have to disengage and remove the internal side cover of the …read all…
Posted on 24 January 2024 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
How to replace the led of the rear central stop in the Audi A6.

To replace the central stop light led in the Audi A6, it is necessary, first of all, to open the tailgate of the rear boot and identify and facilitate access …read all…
Posted on 11 December 2023 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
Rear light bulb replacement

In order to replace the rear light bulb it is necessary to remove the light itself but the operation is very simple and fast; once the luggage rack has been …read all…
Posted on 16 August 2023 by ScegliAuto

Airbags (2) Alternator (3) Loudspeaker (1) Antenna (2) Air conditioning (5) Car stereo (5) Battery (5) Coil (1) Air Vents (6) Bushings (2) Arm (7) Gearbox (2) Spark plugs (2) Bodywork (2) Glove box (3) Control unit (3) Key (26) Timing belt (9) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (15) Checks and maintenance (33) Throttle body (3) Dashboard (2) Gearshift gaiter (2) Drive shaft boot (1) Bearing (1) Brake discs (5) Headlight (8) Tail light (4) Particulate filter (1) Air filter (10) Cabin air filter (12) Petrol filter (1) Diesel filter (3) Oil filter (2) Hand brake (1) Injectors (1) Window lift switch (3) Accessory Kit (2) Xenon headlight kit (2) Light bulb (7) Side turn signal light bulb (2) Headlight bulb (8) Rear light bulb (5) Interior lights ceiling light bulb (2) Third brake light (1) Handle (3) Mask (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (4) Door panel (11) Front bumper (3) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Tires (5) Gear Shift Knob (3) Pump (3) Fuel pump (8) Door (2) Push button (4) Window lift button (1) Instrument cluster (10) Radiator (1) Passenger compartment heating radiator (3) Wheel (3) Fuse box (18) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Lock (5) Brake system (1) Lambda sensor (1) Outside rearview mirror (7) Engine mount (2) Windscreen wipers (3) Thermostat (3) Central tunnel (1) Turbine (3) Valve (1) EGR valve (1)

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos