Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light Bulbs on an Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

Today, we will go through the instructions to remove and replace the tail light bulbs on an Audi A6. First, open the trunk lid and start by removing the plastic cover on the side. Then, unscrew the inner screw of the light and disconnect the electrical connector of the bulbs, as shown in the video.

At this point, separate the bulb holder from the housing, replacing any burnt-out bulbs with new ones (having the same base). Reassemble the light and check the operation of the brake lights.


Posted on 13 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlight on Audi A6
Replacing the Rear Headlight on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Replacing the rear headlight on an Audi A6? Let's see how to remove it from inside the car's body. Open the trunk lid, remove the fabric cover on the…
Replacing Headlight Bulbs on Audi A6
Replacing Headlight Bulbs on Audi A6
Audi A6 (2004-2012 / C6, MK 3) Are the front headlight bulbs burned out? Here’s how to replace them on the Audi A6. Open the hood by pulling the lever located at the bottom right o…
Replacing the Headlight Bulbs on Audi A6
Replacing the Headlight Bulbs on Audi A6
Audi A6 (1997-2004 / MK 2, C5) The headlight bulbs on the Audi A6 are damaged and need to be replaced. Here’s how to change them. Lift the hood by pulling the lever located at the …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos