Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Headlight on Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light

See other generations:
Video tutorial

Today, I will explain how to independently replace the rear headlight on the Audi A6. To perform the replacement, open the trunk and remove the trunk cover by taking out the side clips. Using a socket wrench with an 8 mm insert, remove the nut that secures the headlight in its housing.

Disconnect the main connector and the electrical wires around the headlight bulb. Remove the headlight from its housing and perform the replacement.

Reconnect the connector and the electrical wires, and mount the headlight by securing the nut. Reinstall the dome cover and then secure the trunk cover.


Posted on 23 February 2026 by ScegliAuto


Related tutorials

Audi A6 (1997-2004 / MK 2, C5) To remove the front headlight of the Audi A6, open the hood to access the engine compartment and remove the plastic cover located at the rear of the …
Audi A6 (1997-2004 / MK 2, C5) Replacing the rear headlight on an Audi A6? Let's see how to remove it from inside the car's body. Open the trunk lid, remove the fabric cover on the…
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will learn how to remove and replace the front headlight on the Audi A6 C5, following the instructions provided below. Fi…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos