Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight on Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Tail light

Replacing the rear headlight on an Audi A6? Let's see how to remove it from inside the car's body. Open the trunk lid, remove the fabric cover on the side. Use a screwdriver to remove the screws located on the side of the headlight (right side). Disconnect the rear headlight from its housing once all screws are removed (disconnect the power connectors). Install the bulbs in the socket. Mount the new headlight with the included screws and reconnect the power connectors (cover the side of the trunk). Turn on the lights and check if they work.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Audi A6 2015
How to replace the rear headlight bulb of the Audi A6 2015
Audi A6 (2011-2018 / C7, MK 4) In the following guide aimed at all of you who own an Audi A6 (year 2015), we will help you correctly complete the replacement of the rear headlight …
How to Replace the Rear Headlight on Audi A6
How to Replace the Rear Headlight on Audi A6
Audi A6 (2004-2012 / MK 3, C6) Today, I will explain how to independently replace the rear headlight on the Audi A6. To perform the replacement, open the trunk and remove the trunk…
How to replace the rear light and its bulbs on the Audi A6.
How to replace the rear light and its bulbs on the Audi A6.
Audi A6 (2011-2018 / C7, MK 4) We will briefly discover the steps to dismantle and replace the rear light and its bulbs on the Audi A6. First, let's open the trunk lid and begin re…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos