Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : Oxygen sensor

Audi A6 - Oxygen sensor

Oxygen Sensor Audi A6 (2004-2012 / c 6, mk 3)

Audi A6 (2004-2012 / C6, MK 3)
Replacing the Exhaust Gas Lambda Sensor
This video shows us how to replace the lambda sensors on our car. First, locate where the lambda sensors are housed; in this case, we have two screwed into the …Read all…
Posted on 16 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (3) Antenna (2) Air conditioning (5) Car stereo (4) Battery (4) Ignition coil (1) Air vents (7) Bushings (2) Control arm (9) Transmission (4) Spark plugs (2) Body (3) Glove compartment (3) Control unit (2) Key (46) Timing belt (13) V-belt (7) Air conditioner (2) A/C controls (1) Onboard computer (13) Checks and maintenance (30) Throttle body (3) Dashboard (3) Shifter boot (2) CV boot (1) Bearing (1) Brake rotors (5) Rear bench seat (1) Headlight (11) Tail light (9) Diesel particulate filter (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (1) Fuel injectors (1) Window switch (3) Accessory kit (2) Xenon headlight kit (2) Light bulb (8) Side marker bulb (3) Headlight bulb (10) Tail light bulb (8) Interior dome light bulb (3) (5) Handle (3) Trim cover (2) Engine (8) Power window motor (1) Transmission fluid (1) Engine oil (6) Clock (14) Door trim panel (17) Front bumper (6) Rear bumper (3) Brake pads (6) Hydraulic pistons (1) Shift knob (7) Pump (3) Fuel pump (8) Car door (3) Push button (4) Power window switch (2) Instrument cluster (5) Radiator (1) Heater core (4) Wheel (3) Fuse box (47) Seat (5) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (5) Brake system (1) Oxygen sensor (1) Side mirror (12) AdBlue warning light (9) Warning light – error code (13) Tire pressure warning light (21) Service warning light (36) Manufacturer emblem (1) Engine mount (1) Fuel cap (8) Windshield wipers (5) Thermostat (3) Center console tunnel (4) Turbocharger (3) Valve (1) EGR valve (1) Steering wheel (1)

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos