Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Windscreen wipers

Audi A6 - Windscreen wipers

Audi A6 (2004-2012 / C6, MK 3)
How to mount the windshield wipers.

First of all it is necessary to place the old wiper in a suitable position for replacement. In this case, to do this, we must use the on-board computer where, …read all…
Posted on 15 September 2023 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
Replacement of car wipers

Having a car requires the right maintenance. These include the replacement of the wipers when they are worn. The wipers must always be in perfect order since …read all…
Posted on 15 September 2023 by ScegliAuto
Audi A6 (1994-1997 / MK 1, C4)
How to replace the front wiper blade.

Raise the front wiper from its working position. Unlock the locking mechanism by lifting the lever. Remove the blade by first sliding it down along the wiper …read all…
Posted on 9 September 2023 by ScegliAuto

Airbags (2) Alternator (3) Loudspeaker (1) Antenna (2) Air conditioning (5) Car stereo (5) Battery (5) Coil (1) Air Vents (6) Bushings (2) Arm (7) Gearbox (2) Spark plugs (2) Bodywork (2) Glove box (3) Control unit (3) Key (26) Timing belt (9) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (15) Checks and maintenance (33) Throttle body (3) Dashboard (2) Gearshift gaiter (2) Drive shaft boot (1) Bearing (1) Brake discs (5) Headlight (8) Tail light (4) Particulate filter (1) Air filter (10) Cabin air filter (12) Petrol filter (1) Diesel filter (3) Oil filter (2) Hand brake (1) Injectors (1) Window lift switch (3) Accessory Kit (2) Xenon headlight kit (2) Light bulb (7) Side turn signal light bulb (2) Headlight bulb (8) Rear light bulb (5) Interior lights ceiling light bulb (2) Third brake light (1) Handle (3) Mask (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (4) Door panel (11) Front bumper (3) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Tires (5) Gear Shift Knob (3) Pump (3) Fuel pump (8) Door (2) Push button (4) Window lift button (1) Instrument cluster (10) Radiator (1) Passenger compartment heating radiator (3) Wheel (3) Fuse box (18) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Lock (5) Brake system (1) Lambda sensor (1) Outside rearview mirror (7) Engine mount (2) Windscreen wipers (3) Thermostat (3) Central tunnel (1) Turbine (3) Valve (1) EGR valve (1)

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos