Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : Bearing

Audi A6 - Bearing

Bearing Audi A6 (1994-1997 / c 4, mk 1)

Audi A6 (1994-1997 / C4, MK 1)
Replacement of Front Hub Bearing
Before lifting the vehicle, it is advisable to remove the cover cap of the mounting pins and loosen the bolt at the center of the hub (which is the one …Read all…
Posted on 5 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (3) Antenna (2) Air conditioning (5) Car stereo (4) Battery (4) Ignition coil (1) Air vents (7) Bushings (2) Control arm (9) Transmission (4) Spark plugs (2) Body (3) Glove compartment (3) Control unit (2) Key (46) Timing belt (13) V-belt (7) Air conditioner (2) A/C controls (1) Onboard computer (13) Checks and maintenance (29) Throttle body (3) Dashboard (3) Shifter boot (2) CV boot (1) Bearing (1) Brake rotors (5) Rear bench seat (1) Headlight (10) Tail light (9) Diesel particulate filter (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (1) Fuel injectors (1) Window switch (3) Accessory kit (2) Xenon headlight kit (2) Light bulb (8) Side marker bulb (3) Headlight bulb (10) Tail light bulb (8) Interior dome light bulb (3) (5) Handle (3) Trim cover (2) Engine (8) Power window motor (1) Transmission fluid (1) Engine oil (6) Clock (14) Door trim panel (17) Front bumper (5) Rear bumper (3) Brake pads (6) Hydraulic pistons (1) Shift knob (7) Pump (3) Fuel pump (8) Car door (3) Push button (4) Power window switch (1) Instrument cluster (5) Radiator (1) Heater core (4) Wheel (3) Fuse box (47) Seat (5) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (5) Brake system (1) Oxygen sensor (1) Side mirror (12) AdBlue warning light (9) Warning light – error code (13) (18) Tire pressure warning light (2) Service warning light (36) Engine mount (1) Fuel cap (8) Windshield wipers (5) Thermostat (3) Center console tunnel (4) Turbocharger (3) Valve (1) EGR valve (1) Steering wheel (1)

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos