Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Brake system

Audi A6 - Brake system

Brake System Audi A6 (1997-2004 / mk 2, c 5)

Audi A6 (1997-2004 / MK 2, C5)
Replacing a Faulty ABS Control Module

For this replacement operation, use a ratchet wrench with a 10 mm socket. Start by unbolting the brake fluid reservoir, which needs to be moved out of the way …Read all…
Posted on 5 February 2026 by ScegliAuto

Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (3) Antenna (2) Air conditioning (5) Car stereo (4) Battery (4) Ignition coil (1) Air vents (7) Bushings (2) Control arm (9) Transmission (4) Spark plugs (2) Body (3) Glove compartment (3) Control unit (2) Key (46) Timing belt (13) V-belt (7) Air conditioner (2) A/C controls (1) Onboard computer (13) Checks and maintenance (29) Throttle body (3) Dashboard (3) Shifter boot (2) CV boot (1) Bearing (1) Brake rotors (5) Rear bench seat (1) Headlight (10) Tail light (9) Diesel particulate filter (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (1) Fuel injectors (1) Window switch (3) Accessory kit (2) Xenon headlight kit (2) Light bulb (8) Side marker bulb (3) Headlight bulb (10) Tail light bulb (8) Interior dome light bulb (3) (5) Handle (3) Trim cover (2) Engine (8) Power window motor (1) Transmission fluid (1) Engine oil (6) Clock (14) Door trim panel (17) Front bumper (5) Rear bumper (3) Brake pads (6) Hydraulic pistons (1) Shift knob (7) Pump (3) Fuel pump (8) Car door (3) Push button (4) Power window switch (1) Instrument cluster (5) Radiator (1) Heater core (4) Wheel (3) Fuse box (47) Seat (5) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (5) Brake system (1) Oxygen sensor (1) Side mirror (12) AdBlue warning light (9) Warning light – error code (13) (18) Tire pressure warning light (2) Service warning light (36) Engine mount (1) Fuel cap (8) Windshield wipers (5) Thermostat (3) Center console tunnel (4) Turbocharger (3) Valve (1) EGR valve (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos