Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : Throttle body

Audi A6 - Throttle body

Throttle Body Audi A6 (2004-2012 / c 6, mk 3)

Audi A6 (2004-2012 / C6, MK 3)
Throttle Body Replacement for Audi A6 3.2 V6
Today's main instructions will show you how to remove and replace the throttle body of the Audi A6 3.2 V6 in simple steps. First, open the hood of the vehicle …Read all…
Posted on 10 September 2026 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
Where is the Throttle Body on an Audi A6 and How to Remove It?
In this video, see where the throttle body is located on an Audi A6 and how to proceed if you need to remove it. As shown, it is located on the left side of …Read all…
Posted on 5 August 2026 by ScegliAuto
Audi A6 (2004-2012 / C6, MK 3)
Throttle Body Replacement Instructions
Start by removing the plastic cover located above the engine and locate the throttle body, which is just behind the alternator, connected to the intake …Read all…
Posted on 20 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (3) Antenna (2) Air conditioning (5) Car stereo (4) Battery (4) Ignition coil (1) Air vents (7) Bushings (2) Control arm (9) Transmission (4) Spark plugs (2) Body (3) Glove compartment (3) Control unit (2) Key (46) Timing belt (13) V-belt (7) Air conditioner (2) A/C controls (1) Onboard computer (13) Checks and maintenance (30) Throttle body (3) Dashboard (3) Shifter boot (2) CV boot (1) Bearing (1) Brake rotors (5) Rear bench seat (1) Headlight (11) Tail light (9) Diesel particulate filter (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (1) Fuel injectors (1) Window switch (3) Accessory kit (2) Xenon headlight kit (2) Light bulb (8) Side marker bulb (3) Headlight bulb (10) Tail light bulb (8) Interior dome light bulb (3) (5) Handle (3) Trim cover (2) Engine (8) Power window motor (1) Transmission fluid (1) Engine oil (6) Clock (14) Door trim panel (17) Front bumper (6) Rear bumper (3) Brake pads (6) Hydraulic pistons (1) Shift knob (7) Pump (3) Fuel pump (8) Car door (3) Push button (4) Power window switch (2) Instrument cluster (5) Radiator (1) Heater core (4) Wheel (3) Fuse box (47) Seat (5) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (5) Brake system (1) Oxygen sensor (1) Side mirror (12) AdBlue warning light (9) Warning light – error code (13) Tire pressure warning light (21) Service warning light (37) Manufacturer emblem (1) Engine mount (1) Fuel cap (8) Windshield wipers (5) Thermostat (3) Center console tunnel (4) Turbocharger (3) Valve (1) EGR valve (1) Steering wheel (1)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos