Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : Manufacturer emblem

Audi A6 - Manufacturer emblem

Manufacturer Emblem Audi A6 (2011-2018 / c 7, mk 4)

Audi A6 (2011-2018 / C7, MK 4)
How to Change the Front Emblem on an Audi
Let’s see how to change the front emblem on an Audi: you will need a small screwdriver, needle-nose pliers, and a bit of patience. Pry with the screwdriver …Read all…
Posted on 10 October 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (4) Speaker (3) Antenna (2) Air conditioning (5) Car stereo (4) Battery (4) Ignition coil (1) Air vents (7) Bushings (2) Control arm (9) Transmission (4) Spark plugs (2) Body (3) Glove compartment (3) Control unit (2) Key (46) Timing belt (13) V-belt (7) Air conditioner (2) A/C controls (1) Onboard computer (13) Checks and maintenance (30) Throttle body (3) Dashboard (3) Shifter boot (2) CV boot (1) Bearing (1) Brake rotors (5) Rear bench seat (1) Headlight (10) Tail light (9) Diesel particulate filter (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (1) Fuel injectors (1) Window switch (3) Accessory kit (2) Xenon headlight kit (2) Light bulb (8) Side marker bulb (3) Headlight bulb (10) Tail light bulb (8) Interior dome light bulb (3) (5) Handle (3) Trim cover (2) Engine (8) Power window motor (1) Transmission fluid (1) Engine oil (6) Clock (14) Door trim panel (17) Front bumper (5) Rear bumper (3) Brake pads (6) Hydraulic pistons (1) Shift knob (7) Pump (3) Fuel pump (8) Car door (3) Push button (4) Power window switch (2) Instrument cluster (5) Radiator (1) Heater core (4) Wheel (3) Fuse box (47) Seat (5) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (5) Brake system (1) Oxygen sensor (1) Side mirror (12) AdBlue warning light (9) Warning light – error code (13) (19) Tire pressure warning light (2) Service warning light (36) Manufacturer emblem (1) Engine mount (1) Fuel cap (8) Windshield wipers (5) Thermostat (3) Center console tunnel (4) Turbocharger (3) Valve (1) EGR valve (1) Steering wheel (1)

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos