Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Emblem on an Audi

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Manufacturer emblem

Video tutorial

Let’s see how to change the front emblem on an Audi: you will need a small screwdriver, needle-nose pliers, and a bit of patience. Pry with the screwdriver between the emblem and the grille to detach the clips, and if it’s tough (and it usually is), pull towards you with a piece of wire.

Then remove the broken pieces that remain attached (this is where the pliers come in handy). Install the new emblem by aligning the pins with the holes, and press until you hear the clips snap into place.

You can easily find the new emblem online, and we won’t provide purchase guidance since you may want to install it in chrome, glossy black, matte black, or colored. It is available in any version.


Posted on 10 October 2026 by ScegliAuto


Related tutorials

How to Change the Battery in the Audi A6 Key Fob
How to Change the Battery in the Audi A6 Key Fob
Audi A6 (2011-2018 / C7, MK 4) Changing the battery in the Audi A6 key fob is a straightforward task. The only tool needed is a screwdriver or any flat tool (as shown in the images…
How to Replace the Air Conditioning Compressor on the Audi A6 3.2L
How to Replace the Air Conditioning Compressor on the Audi A6 3.2L
Audi A6 (1997-2004 / C5, MK 2) This guide provides the main instructions for removing and replacing the air conditioning compressor on the Audi A6 3.2L. First, lift the vehicle and…
How to locate and repair the cigarette lighter fuse on the Audi A6
How to locate and repair the cigarette lighter fuse on the Audi A6
Audi A6 (2011-2018 / C7, MK 4) In this video we will see how to change the fuse related to the front cigarette lighter of the Audi A6. The cigarette lighter socket is very importan…

Other guides you may be interested in

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos