Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A6
  6. : Drive shaft

Audi A6 - Drive shaft

Audi A6 (1997-2004 / C5, MK 2)
Disassembly of the drive shaft joint on the Audi A6 C5

Let's see in this video how to remove the front axle shaft on the Audi A6 C5, second series, following the instructions below. First we lift the car and remove …read all…
Posted on 26 February 2024 by ScegliAuto

Airbags (2) Alternator (3) Loudspeaker (1) Antenna (1) Air conditioning (5) Car stereo (5) Battery (5) Coil (1) Air Vents (6) Bushings (2) Arm (7) Gearbox (2) Spark plugs (2) Bodywork (2) Glove box (3) Control unit (3) Key (26) Timing belt (9) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (33) Throttle body (3) Dashboard (2) Gearshift gaiter (2) Drive shaft boot (1) Bearing (1) Brake discs (5) Headlight (8) Tail light (4) Particulate filter (1) Air filter (10) Cabin air filter (12) Petrol filter (1) Diesel filter (3) Oil filter (2) Hand brake (1) Injectors (1) Window lift switch (3) Accessory Kit (2) Xenon headlight kit (2) Light bulb (7) Side turn signal light bulb (2) Headlight bulb (8) Rear light bulb (5) Interior lights ceiling light bulb (2) Third brake light (1) Handle (3) Mask (1) Engine (8) Window motor (1) Gear oil (1) Engine oil (3) Door panel (11) Front bumper (3) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Tires (5) Gear Shift Knob (3) Pump (3) Fuel pump (8) Door (2) Push button (4) Window lift button (1) Instrument cluster (10) Radiator (1) Passenger compartment heating radiator (3) Wheel (3) Fuse box (17) Seat (2) Drive shaft (1) Coolant temperature sensor (1) Lock (5) Brake system (1) Lambda sensor (1) Outside rearview mirror (7) Engine mount (2) Windscreen wipers (3) Thermostat (3) Central tunnel (1) Turbine (3) Valve (1) EGR valve (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos