Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A6
    4. : Disassembly of the drive shaft joint on the Audi A6 C5

Audi A6 - Video tutorial

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Drive shaft
Operation: Disassembly of the drive shaft joint on the Audi A6 C5

Let's see in this video how to remove the front axle shaft on the Audi A6 C5, second series, following the instructions below. First we lift the car and remove the front wheel; then we go to unscrew the fixing pin that connects the axle shaft to our braking system, removing the brake caliper. At this point we unscrew the fixing screws of the drive shaft joint, using a socket wrench; we just have to extract the semi-shaft towards the outside, moving the front hub away to definitively remove the front semi-shaft, as shown in the video!


Posted on 26 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos