Do it yourself
Frequently asked questions about cars and motorcycles

How to program the key of an Audi A4 B7

Model: Audi A4 B7 - Years 2004-2008
Part: Key

Let's see how to program the key/remote control of an Audi A4 B7: we need to have a working remote control, and close the driver's door (which we will keep closed throughout the procedure). Insert the main key into the ignition and turn it to "ON", then insert the remote control into the closed door and press the "unlock" button once for each remote control to be programmed. Turn off the ignition and remove all keys. The configuration of the remotes is as follows: remote 1: press "unlock" then "lock" and on remote 2 press "unlock" and then "lock" wait 60 seconds without opening the doors.

Posted on 31 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2004-2008 / B7) In this tutorial we can see how to program a remote control in the Audi A4, an extremely simple and fast operation. To do this, we will obviously nee…
Audi A4 (2014-2024 / B9) Programming a new key for the Audi A4 b9 may be a result of the breakage of the key in your possession, following an impact, a failure of a solder jo…
Audi A4 (2004-2008 / B7) To program the key of the Audi A4, you need to connect a diagnostic tool to the OBD port of the vehicle and at the same time insert the blank key int…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos