Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the "Component Protection Active" Message on the Audi A6 Display?

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

You can remove the "Component Protection Active" message on the Audi A6 display by connecting a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steering column. Once connected, select the car model and its corresponding version.

Follow the prompts to clear the message and unlock the radio. After completing the procedure, disconnect the scanner and verify that everything is functioning.


Posted on 8 April 2026 by ScegliAuto


Related tutorials

How to Reset the Audi A6 Infotainment System to Factory Settings
How to Reset the Audi A6 Infotainment System to Factory Settings
Audi A6 (2018-2026 / MK 5, C8) If you are experiencing various issues with the infotainment system of the Audi A6 (latest model), you need to perform a factory reset. Let's find ou…
How do you deactivate the airbags in the Audi A6?
How do you deactivate the airbags in the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) In this video, we see how it is possible to disable the side airbag of the front passenger seat, following the instructions of the protagonist of the…
How to Reset the Tire Light on the Audi A6
How to Reset the Tire Light on the Audi A6
Audi A6 (2011-2018 / C7, MK 4) You can reset the tire light on the Audi A6 mk7, produced from 2011 to 2018, using the monitor in the vehicle. After checking the tire pressure, proc…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos