Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the message 'Propulsion activated, turn off the ignition' mean in the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Checks and maintenance

It is no surprise that cars have been equipped with numerous active and passive safety devices in recent years, as well as, in this specific case, fuel savings and environmental pollution reduction. The Audi A3 in the attached video tutorial is equipped with a Start and Stop system, which automatically turns off the engine when the vehicle stops and restarts it when the gear is engaged for moving off. The message in question indicates that this device is active and that the engine can be turned off.

Posted on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn on the Headlights of the Audi A3?
How to Turn on the Headlights of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To turn on the lights of the Audi A3, use the knob located on the dashboard, immediately to the left of the steering wheel: this knob must be rotated…
How to deactivate the safe lock system of the Audi A3
How to deactivate the safe lock system of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today's main instructions will show us how to deactivate the automatic safety locking system or safe lock of the Audi A3, as well as the Volkswagen G…
How to reset the service light in the Audi A3
How to reset the service light in the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In today's video, see how to reset the service due parameter in the third series Audi A3. First, remember to perform the correct maintenance as state…

    Frequently Asked Questions

    • A3 2012-2019 - How to remove the armrest of an Audi A3? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos