Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the DSG Gearbox on an Audi S3?

Model: Audi A3 - Years 2012-2019
Part: Transmission

You can reset the DSG gearbox on an Audi S3 by connecting a diagnostic tool to the car's OBD port: this is located in the dashboard immediately below the steering column. Once the connection is made, you can select the car model in question and its corresponding version: then you can follow the on-screen instructions to reset the DSG gearbox. At this point, you can disconnect the scanner and check that the reset has been performed correctly.

Posted on 4 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Automatic Gearbox on an Audi A3?
How to Reset the Automatic Gearbox on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To reset the automatic gearbox on an Audi A3, turn on the ignition by turning the key: then, press the accelerator pedal for about 30 seconds. After …
How to replace the gear knob of the Audi A3 8P
How to replace the gear knob of the Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In the following guide you will find the description of the few simple steps that you need to follow to replace the old gear knob inside the cockpit …
How to replace the gear knob of the Audi A3
How to replace the gear knob of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will explain how to replace the knob of an Audi A3 model 8P car. To perform the replacement of the knob, we need to lift the gear shift boot…

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos