Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the air vents on an Audi a3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Air vents

Let's see how to remove the air vents (side dashboard) on an Audi A3. We use multiple levers to remove the vents. We lever the upper and lower parts with the levers (around the frame), detach the air vents and extract them from the dashboard. Once we have extracted the vents outwards, disconnect them from the power supply terminals (if present) and remove the piece. Let's get ready to do the maintenance on the inside of the dashboard and immediately afterwards we begin to assemble the new air vents; we replace the other vents on the dashboard.

Posted on 4 April 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing the Audi A3 air vent
Removing the Audi A3 air vent
Audi A3 (2003-2013 / 8P, MK 2) In this short video tutorial we will see how to remove the front air vents of an Audi A3. The disassembly operation is very simple and does not requi…
Removing the air vents on the Audi A3
Removing the air vents on the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) .. see in this short and simple video tutorial how to remove the air vents on an Audi A3. To do this, you need a flat screwdriver or better, a plastic.. …
How do you remove the front headlight of an Audi car?
How do you remove the front headlight of an Audi car?
Audi A3 (2012-2019 / MK 3, 8V) We illustrate in a generic way how to disassemble the front headlight of an Audi car, specifying that the vehicle used in the video is an Audi A3 8v.…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos