Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

To carry out this operation, locate the position of the filter for replacement. It is situated behind the small glove compartment in front of the front passenger seat.

Open the compartment and push the two side parts to release the latch, allowing you to remove it completely. This will enable you to push the clips that secure the filter cover.

Remove the cover and extract the filter, taking care to note the orientation of the filter. Reinstall the new filter in the correct direction.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Toyota Yaris
How to Replace the Cabin Air Filter on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In a few simple steps, we will see how to replace the cabin air filter or pollen filter on a Toyota Yaris. First, get inside the vehicle on the passe…
How to Replace the Cabin Air Filter on a Toyota Yaris
How to Replace the Cabin Air Filter on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) If you haven't replaced the cabin air filter in your Toyota Yaris for a long time and want to know how to do it correctly and safely, pay attention t…
How to replace the cabin air filter of the Toyota Yaris 4
How to replace the cabin air filter of the Toyota Yaris 4
Toyota Yaris (2020-2026 / MK 4) If you own a Toyota Yaris Mk4 and want to find out how to independently replace the cabin air filter, all you have to do is read the following guide …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos