Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

If you haven't replaced the cabin air filter in your Toyota Yaris for a long time and want to know how to do it correctly and safely, pay attention to the following procedure and follow it step by step. First, ensure that the car is completely off, then open the glove compartment located on the passenger side and remove the side safety hook.

At this point, locate the box containing the air filter and proceed with its replacement. Finally, close the glove compartment, and you are done.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Toyota Yaris XP130
Replacing the Cabin Air Filter on the Toyota Yaris XP130
Toyota Yaris (2011-2019 / Xp130) Let’s go through the steps to remove and replace the cabin air filter or air conditioning filter on the Toyota Yaris XP130. First, get inside the veh…
How to Replace the Cabin Filter on the Toyota Yaris XP90
How to Replace the Cabin Filter on the Toyota Yaris XP90
Toyota Yaris (2005-2011 / Xp90) In this guide, you will learn how to replace the cabin air filter on the Toyota Yaris XP90. The procedure is not complex and requires no special tool…
Replacing the Cabin Air Filter on the Toyota Yaris (2018)
Replacing the Cabin Air Filter on the Toyota Yaris (2018)
Toyota Yaris (2011-2019 / Xp130) Discover how to remove and replace the cabin air filter on the 2018 Toyota Yaris in this video, following the instructions below. First, get inside t…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos