Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Toyota Yaris XP90

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

In this guide, you will learn how to replace the cabin air filter on the Toyota Yaris XP90. The procedure is not complex and requires no special tools. Start by sitting in the passenger seat, open the glove compartment, and press in on both sides to release the drawer.

This will expose the air duct. Unclip the plastic cover that conceals the filter to remove it (there are arrows on the side of the filter indicating the correct position).

Finally, insert the new cabin air filter, reattach the cover, and finish by securing the glove compartment. It is advisable to sanitise the air circuit with every filter change.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin filter in the Toyota Yaris?
How to replace the cabin filter in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial we can see how to replace the cabin filter in the Toyota Yaris, an extremely simple and quick operation. First of all, go to the pas…
How to replace the cabin air filter of the 2005 Toyota Yaris.
How to replace the cabin air filter of the 2005 Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) The replacement of the cabin air filter in a 2005 Toyota Yaris is a simple and quick task that can be done independently. After getting into the vehi…
Replacing the rear wheel bearing on the Toyota Yaris 2 (XP90)
Replacing the rear wheel bearing on the Toyota Yaris 2 (XP90)
Toyota Yaris (2005-2011 / Xp90) In this video, see how to remove and replace the rear wheel bearing on the Toyota Yaris XP90, second generation, following the instructions below. Fi…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos