Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A4 B6 gear knob replacement

Model: Audi A4 B6 - Years 2000-2004
Part: Shift knob

In this video tutorial we will see how to replace the worn gear knob on an Audi A4 B6. The operation takes a few minutes and is not very complex. So first we pry into the frame below the gearbox so that it can be extracted; help yourself with something in plastic if you can't unhook it. Then we remove the cap and unhook the band going to cut it with a pair of scissors. At this point we remove the cap together with the knob: if we want to replace it together with the gearshift boot. Once everything is done we proceed with the reassembly of the components!

Posted on 8 August 2020 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the gear knob on the Audi A4 B8
Disassembly and replacement of the gear knob on the Audi A4 B8
Audi A4 (2007-2016 / B8) Let's find out the steps that will allow us to disassemble and replace the gear knob on the Audi A4 B8, following the instructions below. First of al…
How to replace the gearshift gaiter on an Audi A4
How to replace the gearshift gaiter on an Audi A4
Audi A4 (1994-2000 / B5) Before starting, we will have to sit in the driver's seat of our Audi A4. So let's start by disassembling and removing the gear knob, simply by unscr…
Replacement of the gear shift boot of the Audi A4
Replacement of the gear shift boot of the Audi A4
Audi A4 (1994-2000 / B5) Today's steps will show us how to disassemble and replace the gear shift knob and boot of the Audi A4, following the instructions below. First, we ge…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos