Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A3 headlight bulb replacement

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Headlight bulb

In this video tutorial we will see how to remove and replace the headlight bulb of an Audi A3 Sportback. First we disassemble the wheel by lifting the car with the jack. Then to access the rear part of the lighthouse we are going to remove the wheel housing by unscrewing the screws: at this point we access the lighthouse by removing the protective cap. If a xenon lamp is fitted, remove the entire block by pulling and then replacing the bulb. It is very important to mount the bulb correctly by attaching the bayonets and connecting the electrical connector! It is advisable not to disassemble the headlight.

Posted on 3 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the interior rear light of the Audi A3 Sportback
How to replace the interior rear light of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) To replace the internal taillight of the Audi A3 Sportback, we start by opening the trunk, with a plastic tool we remove the inner cover (on the trun…
How do you replace the taillight bulb in the Audi A3 sportback?
How do you replace the taillight bulb in the Audi A3 sportback?
Audi A3 Sportback (2003-2013 / MK 2) The work done in this video explains how to switch from bi-xenon light to LED light, but essentially what interests us is accessing the headlight and…
How to replace the headlight bulb on an Audi A3 Sportback?
How to replace the headlight bulb on an Audi A3 Sportback?
Audi A3 Sportback (2003-2013 / MK 2) Before we can begin, we will need to open the front hood, it is necessary as we will have all the necessary space to be able to carry out the replace…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos